Simrig SR1 - Motion System
The SIMRIG SR1 is our first motion system. It has been sold to all corners of the world since 2018. All units are designed, built and tested by SIMRIG in Sweden.
The SIMRIG SR1 is designed for maximum immersion and ease of use. With its small footprint, it can be mounted on your existing rig made of aluminum profiles. The electronic control unit is small enough to mount under your seat. It connects directly to your computer via USB. The power supply works with 100-240 V mains voltage.
The system has three degrees of freedom (3-DOF): pitch, roll and heave. Pitch and roll allow the system to simulate acceleration, braking and cornering. It can also follow track geometry; for example, by leaning forward when driving downhill. Heave allows the system to push the rig up when you hit curbs and bumps in the road.
The SIMRIG SR1 is accompanied by SIMRIG Control Center. This software controls the motion system by interpreting the position and acceleration of the simulated vehicle. It supports all major simulation titles.
For the best performance, durability and user experience, the maximum load is set at 175 kg. The maximum load includes the rig, driver, other peripherals and additional weight moved by the SIMRIG SR1 motion system.
Scope of delivery:
4x SIMRIG SR1 linear drive
1x SIMRIG SR1 ECU
1x 500W power supply (100-240 V at 50-60 Hz)
1x emergency stop switch
4x cable for linear drive (1m)
1x power cable for ECU (2m)
1x power cable (C13)
1x USB cable (3m)
1x SIMRIG Control Center (Download)
Various screws and T-slots
4x SIMRIG SR1 mount
4x aluminum profile 780x20x20 mm
4x aluminum angle brackets
4x profile cover
Various screws and T-slots
Supported simulations:
American Truck Simulator
Assetto Corsa
Racing Competizione Asset
Automobilista
Automobilista 2
BeamNG.drive
Dirt4
DiRT Rally
DiRT Rally 2.0
Euro Truck Simulator 2
Digital Combat Simulator (DCS)
F1 2017
F1 2018
F1 2019
F1 2020
F1 2021
F1 2022
ForzaHorizon4
ForzaHorizon5
Forza Motorsport 7
Gran Turismo Sport
Gran Turismo 7
GRID2019
GTLegends
GTR2
iRacing
KartPower
Live for Speed
Microsoft Flight Simulator 2020
Microsoft Flight Simulator X
NoLimits 2
Project CARS
Project CARS2
Project CARS3
RACE07
Race Room Racing Experience
Race
rFactor2
Richard Burns Rally
WRC7
WRC8
WRC9
WRC10
X-Plane
The SIMRIG SR1 connects to your PC via a USB cable. You can also connect it to your favorite racing simulator via our SIMRIG Control Center.
Please note: The rig shown and other accessories are not included in the scope of delivery. This is the motion system including mounting material and the control of the system.
If you have any questions, please feel free to request purchase advice via our ticket system.
A (as usual) very extensive video review can be found at Simracing Garage:
The SIMRIG SR1 is our first motion system. It has been sold to all corners of the world since 2018. All units are designed, built and tested by SIMRIG in Sweden.
The SIMRIG SR1 is designed for maximum immersion and ease of use. With its small footprint, it can be mounted on your existing rig made of aluminum profiles. The electronic control unit is small enough to mount under your seat. It connects directly to your computer via USB. The power supply works with 100-240 V mains voltage.
The system has three degrees of freedom (3-DOF): pitch, roll and heave. Pitch and roll allow the system to simulate acceleration, braking and cornering. It can also follow track geometry; for example, by leaning forward when driving downhill. Heave allows the system to push the rig up when you hit curbs and bumps in the road.
The SIMRIG SR1 is accompanied by SIMRIG Control Center. This software controls the motion system by interpreting the position and acceleration of the simulated vehicle. It supports all major simulation titles.
For the best performance, durability and user experience, the maximum load is set at 175 kg. The maximum load includes the rig, driver, other peripherals and additional weight moved by the SIMRIG SR1 motion system.
Scope of delivery:
4x SIMRIG SR1 linear drive
1x SIMRIG SR1 ECU
1x 500W power supply (100-240 V at 50-60 Hz)
1x emergency stop switch
4x cable for linear drive (1m)
1x power cable for ECU (2m)
1x power cable (C13)
1x USB cable (3m)
1x SIMRIG Control Center (Download)
Various screws and T-slots
4x SIMRIG SR1 mount
4x aluminum profile 780x20x20 mm
4x aluminum angle brackets
4x profile cover
Various screws and T-slots
Supported simulations:
American Truck Simulator
Assetto Corsa
Racing Competizione Asset
Automobilista
Automobilista 2
BeamNG.drive
Dirt4
DiRT Rally
DiRT Rally 2.0
Euro Truck Simulator 2
Digital Combat Simulator (DCS)
F1 2017
F1 2018
F1 2019
F1 2020
F1 2021
F1 2022
ForzaHorizon4
ForzaHorizon5
Forza Motorsport 7
Gran Turismo Sport
Gran Turismo 7
GRID2019
GTLegends
GTR2
iRacing
KartPower
Live for Speed
Microsoft Flight Simulator 2020
Microsoft Flight Simulator X
NoLimits 2
Project CARS
Project CARS2
Project CARS3
RACE07
Race Room Racing Experience
Race
rFactor2
Richard Burns Rally
WRC7
WRC8
WRC9
WRC10
X-Plane
The SIMRIG SR1 connects to your PC via a USB cable. You can also connect it to your favorite racing simulator via our SIMRIG Control Center.
Please note: The rig shown and other accessories are not included in the scope of delivery. This is the motion system including mounting material and the control of the system.
If you have any questions, please feel free to request purchase advice via our ticket system.
A (as usual) very extensive video review can be found at Simracing Garage:
GPSR Information
Herstellerinformationen
Name: SIMRIG ABAdresse: Torkelsbohögsvägen 11, 437 41 Lindome, Sweden
E-Mail: info@simrig.se
Webseite: https://simrig.se
Europäischer Hersteller: Ja